4550 ALL PURPOSE RETARDER
Ready-to-spray blending agent designed to melt-in the blend edge of clears
and single stage colors. Helps to hide the blend edge where a full panel
refinish can not be performed.
Application
Apply the single stage
color coat or clear and blend as needed stepping each coat out past the previous
coat. Allow for proper flash times between coats of material.
Single
Stage
• Immediately after applying the final blended coat of single stage
color, or clear, mix at a 1:1 ratio with the topcoat just sprayed. Step this out
a few inches beyond the previous coat.
Clearcoat
• In a clean gun
Unless spraying clear (empty out clear but do not clean) Add a few ounces
•
Reduce air pressure slightly to 6-8 psi and apply 1 - 2 coats of blender working
the solvent beyond the blend edge.
• Do not flood the edge. Do not apply more
solvent than needed to melt the edge.
• Hand polish after total dry or the
next day for best results
Part #: ADV.155
Price and Units
Units: GALLON
Units: GALLON Product Links: MSDS |