ACTIVATOR FOR 325 PRIMER
#325 HIGH BUILD 2K GRAY DTM PRIMER FILLER/SEALER - 2.1 VOC
PRODUCT DESCRIPTION:
ADVANTAGE #325 Primer is formulated with a hybrid of epoxy and
acrylic polymers, which provide excellent adhesion, good
corrosion resistance, productive dry times, and ease of sanding.
SURFACE PREPARATION:
Clean all areas to be primed with compliant Wax & Grease Remover
to remove all dirt, wax, grease, and other contaminants.
Featheredge and sand the original finish. Surface must be clean
and dry. Note: Rust and oxidation must be removed prior to
applying primer by sanding, grinding, or sand blasting.
MIXING DIRECTIONS: | ||
High Build Primer Filler |
Regular Build Primer Filler |
Primer Sealer |
4 PARTS #325 Primer 1 PART #326 Activator |
4 PARTS #325 Primer 1 PART #326 Activator 1 PART Urethane Reducer - Nat’l Rule Acetone - California |
4 PARTS #325 Primer 1 PART #326 Activator 2 PARTS Urethane Reducer - Nat’l Rule Acetone - California |
APPLICATION DIRECTIONS & POT LIFE:
Spray one to three medium wet coats allowing 10-20 minutes flash
between coats. Pot Life is: 2-3 hours @ 77° F.
ADDITIVES: | |
ACCELERATOR: N/A | FISHEYE: N/A |
FLEX ADDITIVE: Not required | Note: Do not spray when surface
temperature is below 50°F |
CLEAN-UP:
Clean spray equipment immediately after use with Virgin Wash
Thinner.
SUBSTRATES:
Properly cleaned and sanded aluminum, steel, galvanized steel or
sand blasted steel. Properly cleaned and sanded fiberglass, SMC,
E-Coat and OEM finish.
GUN SETUPS: | AIR PRESSURES | ||
CONVENTIONAL | CONVENTIONAL @ Gun | PANEL | OVERALL |
Gravity Feed: 1.6 mm - 2.0 mm |
Gravity Feed: | 30-35 psi | 40-45 psi |
Siphon Feed: 1.8 mm - 2.0 mm |
Siphon Feed: | 30-40 psi | 45-55 psi |
HVLP: 1.6 mm - 2.0 mm |
HVLP @ Cap: | 6-8 psi | 8-10 psi |
FLASH/DRY TIMES: | Please Note: | |
AIR DRY @ 77°F |
Flash between coats: 10-20 Minutes |
Reduction may accelerate flash times. |
To Sand: 60-90 Minutes | ||
To Topcoat: 30 Minutes* |
*Topcoat without sanding - 24 hrs max |
TECHNICAL DATA: | |
Volume Solids: 45.7% (RTS) | Regulatory VOC: 204 g/L (1.7
lbs./gal.) |
Pot Life: 2-3 Hours @ 77°F | Actual VOC: 146 g/L (1.21 lbs./gal.) |
Part #: ADV.32616
Price and Units
Units: 1/2PINT
Units: 1/2PINT Product Links: MSDS Technical Data Sheet Product Description |
Customers Who Looked At This Item Also Looked At:
DTM EPOXY PRIMER /SEALER GREY |
|
DTM EPOXY PRINMER/SEALER GRAY |
|
ACTIVATOR FOR 325 PRIMER |
|