EURO MAX HS CLEAR 4.2 VOC

#575 EURO MAX HIGH SOLIDS
CLEARCOAT 4.2 VOC

PRODUCT DESCRIPTION:
#575 is a Euro 4.2 VOC high solids, tough, durable urethane clearcoat that helps make shops more productive. It provides great gloss direct from the gun, buffing is minimized. Provides high build, dries fast and is easy to spray with excellent flow out and leveling. Use on a variety jobs – from small repairs to overall refinishing.

BASECOAT
Apply basecoat per manufacture’s mixing and application instructions. Allow sufficient flash times before applying #575 clearcoat. Inadequate flash time will affect the performance of the clear.

MIXING DIRECTIONS:
Mix 2 parts #575 clear with 1 part #576, #577, or #578 activator by volume. Shake product well before pouring. Strain before using. Activator selection should be based on the size of part to be painted and the booth temperature at the time of painting.

APPLICATION DIRECTIONS:
Apply 2-3 full wet coats at 40-50 psi or (6-10 psi when using HVLP at the gun), allowing a 10-15 minute flash between coats.

DRY TIMES AT 77°F:
DUST FREE	10-15 MINUTES
TACK FREE	20-30 MINUTES
TO BUFF	16-24 HOURS
TO DELIVER	16-24 HOURS
FORCE DRYING:
PURGE TIME	15 MINUTES AT 77° F
BAKE TIME	40 MINUTES AT 140° F
Allow a one to two hour cool-down time before wet sanding or buffing after force drying.

 
RECOATING:
#575 clearcoat may be recoated after a 16-24 hour air dry at 77° F or after 1 hour cool down after force drying at 140° F for 40 minutes. After 48 hours, clear must be sanded before recoating.

BLENDING:
Dry edges can be melted in by lightly misting a coat of Retarder Blender on the blend area.

BUFFING:
Allow at least 16 hours air dry at 77° before buffing, or 1 hour cool down after force drying #575 clear. Temperature, humidty and film thickness will effect buff times.

FISHEYE ELIMINATOR:
The use of fisheye eliminator is strongly discouraged.

CLEAN-UP:
Clean spray equipment immediately after use with gun wash reducer or urethane reducer.

POT LIFE: 1-2 Hours at 77°F.

PRODUCT TECHNICAL DATA (READY TO SPRAY):
Clear:	2 parts using #575
Hardeners:	1 part #576, #577, or #578
Viscosity (RTS):	20 - 24 seconds #2 Zahn
Weight Solids (RTS):	41.5%
Film Build:	1.0 - 1.4 mils per full wet coat
Coverage:	529 sq ft per gallon @ 1 dry mil
Pot Life:	1 - 2 hours
V.O.C:	4.2 lbs/gal
Disposal/Safety:	See MSDS for this product
Humidity Resistance:	Excellent
Salt Spray Resistance:	Excellent

Part #: ADV.57505

Price and Units

Units: 5LITRE

Units: 5LITRE Product Links: MSDS Technical Data Sheet