PRODUCT
DESCRIPTION:
5 Star Pro-Glass Urethane Sealant is a user friendly, medium to
fast setting autoglass urethane that provides excellent strength
because of its powerful adhesion to glass and metal. Pro-Glass
meets all O.E.M. standards and applicable motor vehicle safety
requirements (U.S. MVSS 212 & 216). Pro-Glass can also be used
as a high strength single component seam and joint sealer for
re-applying moldings and ground effects.
Pro-Glass may be applied with any standard manual or air driven
caulking gun. Available in Black.
FEATURES:
1. Very tough
2. Excellent shelf life
3. High solids
4. Compatible with all automotive paints
5. Automotive & construction uses
6. Superb tooling qualities
|
|
|
PRODUCTS: |
|
| |
10.6 oz. Tube |
|
Urethane Sealant (black) |
#5280 |
|
APPLICATION:
Surfaces that seam and joint sealers are going to be applied to must be
dry, clean, grease and oil free. If installing windshields, please
follow the car manufacturers instructions for replacing windshields.
APPLICATION DIRECTIONS:
1. Insert the cartridge into a standard manual or pneumatic
caulking gun.
2. Cut the nozzle of the cartridge.
3. Using a long punch, etc., insert into the nozzle to break the seal
inside the cartridge.
4. Caulk and tool the Pro-Glass Urethane Sealant into required area.
6. Allow to dry for at least 1 hour before painting.
7. Full dry time will vary depending on room temperature.
8. Applying heat may decrease dry time.
CLEAN UP:
Not required.
TECHNICAL DATA:
|
Color: |
Black |
|
Resin Type: |
Polyurethane |
|
Disposal & Safety: |
See
MSDS for these products |
|
HMS Warehousing Corporation
