URETHANE PRIMER GRAY
DESCRIPTION
A two-component, premium quality urethane that offer the versatility of use as a primer or sealer with proper reduction. PS5008A™ and PS5009A™ offer high film build, good metal adhesion, quick and easy sanding, while maintaining superior gloss and DOI. This primer meets National Rule requirements.
FEATURES
- High Film Build
- Minimal Shrinkage
- Primer Surfacer or Sealer
PRODUCT DETAILS
Type | Primer |
Substrates | Properly
cleaned steel, aluminum, and galvanized steel PS3042™/PS3044™/PS3045™ Epoxy Primer *Allow epoxy to flash for 1 hour prior to applying PS5008A™ or PS5009A™PS3008™ ViperGrip II™ Metal-Etch Primer Thoroughly sanded OEM and cured paint Sanded fiberglass / SMC Cured body filler |
VOC | Mix 4:1 4.49 lbs/gal (538 g/l); Mix 4:1:1 < 4.50 lbs/gal (539 g/l) |
AVAILABLE SIZES
Size | Case Qty | UPC | GMC |
---|---|---|---|
Quart | 12 | 842027103094 | |
Gallon | 4 | 842027103087 |
MIXING INSTRUCTIONS
Components | Parts by Volume |
---|---|
PS5009A | 4 |
PS5008B | 1 |
TH0860/TH0870/TH0885/TH0895 | 3/4 Opt Reduction |
Pot Life | Catalyzed Primer: 1 hour @ 75°F/23°C Sealer: 2 hours @ 75°F/23°C |
APPLICATION INSTRUCTIONS
Application
PRIMER / SURFACER APPLICATION: Apply over properly prepared surfaces. Apply in single full wet coats, allowing 5 – 10 minute flash between coats. For best results, do not apply more than 3 coats. Brushable / Rollable Option Mix according to directions. (A small amount of reducer will improve flow) Apply 1 even coat of PS5008A™/PS5009A™ Primer, making sure to cover the repair area completely into the featheredge. If a 2nd coat is applied, allow a 5 -10 minute flash between coats. Apply the 2nd coat within the first coats outer edge.For best results, do not apply more than 3 coats.SEALER APPLICATION:Apply 1 single wet coat of properly mixed PS5008A™/PS5009A™ as a sealer to create a uniform base. Allow to flash for 30 – 45 minutes before applying topcoats.
Gun Setup & Air Pressure
Refer to Technical Data Sheet.
Dry Time
Air Dry | Force Dry |
---|---|
To sand Primer: 1 – 1 ½ -hours per coat at 75°F/23°C Sealer: 20 – 30 minutes per coat at 75°F/23°C | |
To topcoat Primer: 4 - 6 hours after sanding. Sealer: 20 – 30 minutes at 75°F/23°C |
Coverage (Ft2) | Mix 4:1 642; Mix 4:1:1 45 |
Dry Film Thickness (mil) | Mix 4:1 2.2 + 0.3 mils per coat; Mix 4:1:1 + 0.5 |
Part #: MO.PS5009A
Price and Units
Units: QUART
Units: QUART Product Links: MSDS - Primer Technical Data Sheet MSDS - Activator MSDS - Reducer |
Units: GALLON
Units: GALLON Product Links: MSDS - Primer Technical Data Sheet MSDS - Activator MSDS - Reducer |
Customers Who Looked At This Item Also Looked At:
URETHANE PRIMER ACTIVATOR
Part #: MO.PS5008B |
|
2K URETHANE PRIMER - GRAY |
|
2K URETHANE PRIMER - GRAY |
|