//

RPS CUP 40-0.9 LTR PLUG-IN

SATA RPS cup system

The mixing cup for painting, refilling and storing paint
SATA RPS (Rapid Preparation System) is the cup system for bodyshops emphasising perfect painting finishes and high efficiency. SATA RPS facilitates the painters’ work, significantly enhances the bodyshops’ productivity and critically reduces the use of cleaning agents and solvents. Learn more about the specific features of SATA RPS and the advantages you will have!

One cup – four functions

mix paint
paint
refill the paint
store the paint
Simple – with only three components!
SATA RPS consists of 3 components only which means less handling efforts and thus, less expenditure of time

a cup
a lid
a sieve

No additional components are necessary. There is no other cup system with the same functions but with three components only!

No compromise – no adapters
SATA paint spray guns with QCC (Quick Cup Connector) are equipped with very short material passages without any needless rough edges. This feature prevents material deposits in the paint spray gun and allows easy and thorough cleaning.

These advantages remain completely unchanged with the use of RPS as it is the only cup system that fits directly on your SATA paint spray gun without adapter. By combining SATA RPS and SATA paint spray guns with QCC, you will have the best possible basis for top quality paint jobs.

Furthermore, with the use of RPS, your SATA paint spray gun remains its low centre of gravity and thus remains perfectly balanced. Even the extremely low weight of RPS contributes to fatigue-free work: cup and lid of the 0.6l version weighs 50g and the 0.9l version weighs 65g.

Is there another reason to accept compromise?

Perfect – the paint finish

RPS is based on the reliable flow cup principle. The continuous cup ventilation via the anti-drip device ensures a steady material flow – a basic condition for high colour match precision.

By the way, this is exactly the reason why leading paint manufacturers use flow cups for the development of paints and for testing their colour shades.

Cup sizes
SATA RPS is available in two cup sizes - 0.6l and 0.9l.

Both lids and sieves are identical for 0.6l and 0.9l cups. Thus, the total number of the various components remains clear. By the way, lids and sieves can be ordered separately.

Economical
The cleaning of the cup is not necessary with SATA RPS, thus saving time, cleaning agents and cost. Perfect colour match and perfect paint jobs reduce time and cost intensive rework. And the very few components additionally facilitate the entire work process - simplicity pays.

Testing is free of charge
Ask your SATA dealer for a demonstration of SATA RPS in your bodyshop and see for yourself of the advantages – free of charge and without obligation.

For the application of UV paints, the RPS 0.6 l cup is also available in a black dyed version protecting the paint inside the cup from hardening. A useful accessory for air caps of SATAjet 3000 and SATAjet 2000 as well as SATAjet RP spray guns are the UV protectors.

Adapters
Contrary to other disposable cup systems, SATA RPS does not require any adapter in combination with SATA paint spray guns. Therefore, the spray gun can be easily and reliably cleaned. For older SATA paint spray guns and spray guns of other manufactures spray gun adapters are available.

Filling quantity / weight per cup:

0.6l / 50 g
0.9l / 65 g

Mesh sizes:

125µm

200µm

To choose the correct sieves (125 or 200µ), please follow the recommendations of the paint manufacturer.

SATA RPS 0,6 l 125 µm flat sieve, set of 57 unitsArt. No. 125062
SATA RPS 0,6 l 200 µm plug-in sieve, set of 57 unitsArt. No. 125070
SATA RPS 0,6 l 200 µm flat sieve, set of 57 unitsArt. No. 151746
SATA RPS Starterkit 1 content: 0,6 l disposable cup with lid and flat sieve 125 µ , box of 57 pieces, spray gun holder, pumping pressure spray bottle 1 l and cup carrierArt. No. 128009
SATA RPS Starterkit 2 content: 0,6 l disposable cup with lid and plug-in sieve 200 µ , box of 57 pieces, spray gun holder, squeeze bottle 1 l and cup carrierArt. No. 128009
SATA RPS 0,9 l µm flat sieve, set of 40 unitsArt. No. 118471
SATA RPS 0,9 l 200 µm plug-in sieve, set of 40 unitsArt. No. 118489
SATA RPS 0,9 l 200 µm flat sieve, set of 40 unitsArt. No. 151720
 

 

Part #: SA.1011981

Price and Units

Units: CSE/40

Units: CSE/40
Product Links:
Technical Data Sheet

//