SLOW EURO MAX ACTIVATOR 4.2VOC
#575 EURO MAX HIGH SOLIDS
CLEARCOAT 4.2 VOC
PRODUCT DESCRIPTION:
#575 is a Euro 4.2 VOC high solids, tough, durable urethane
clearcoat that helps make shops more productive. It provides
great gloss direct from the gun, buffing is minimized. Provides
high build, dries fast and is easy to spray with excellent flow
out and leveling. Use on a variety jobs – from small repairs to
overall refinishing.
BASECOAT
Apply basecoat per manufacture’s mixing and application
instructions. Allow sufficient flash times before applying #575
clearcoat. Inadequate flash time will affect the performance of
the clear.
MIXING DIRECTIONS:
Mix 2 parts #575 clear with 1 part #576, #577, or #578 activator
by volume. Shake product well before pouring. Strain before
using. Activator selection should be based on the size of part
to be painted and the booth temperature at the time of painting.
APPLICATION DIRECTIONS:
Apply 2-3 full wet coats at 40-50 psi or (6-10 psi when using
HVLP at the gun), allowing a 10-15 minute flash between coats.
DRY TIMES AT 77°F: | |||
DUST FREE | 10-15 MINUTES | ||
TACK FREE | 20-30 MINUTES | ||
TO BUFF | 16-24 HOURS | ||
TO DELIVER | 16-24 HOURS | ||
FORCE DRYING: | |||
PURGE TIME | 15 MINUTES AT 77° F | ||
BAKE TIME | 40 MINUTES AT 140° F | ||
Allow a one to two hour cool-down time before wet sanding or buffing after force drying. |
RECOATING:
#575 clearcoat may be recoated after a 16-24 hour air dry at 77°
F or after 1 hour cool down after force drying at 140° F for 40
minutes. After 48 hours, clear must be sanded before recoating.
BLENDING:
Dry edges can be melted in by lightly misting a coat of Retarder
Blender on the blend area.
BUFFING:
Allow at least 16 hours air dry at 77° before buffing, or 1 hour
cool down after force drying #575 clear. Temperature, humidty
and film thickness will effect buff times.
FISHEYE ELIMINATOR:
The use of fisheye eliminator is strongly discouraged.
CLEAN-UP:
Clean spray equipment immediately after use with gun wash
reducer or urethane reducer.
POT LIFE: 1-2 Hours at 77°F.
PRODUCT TECHNICAL DATA (READY TO SPRAY): | |
Clear: | 2 parts using #575 |
Hardeners: | 1 part #576, #577, or #578 |
Viscosity (RTS): | 20 - 24 seconds #2 Zahn |
Weight Solids (RTS): | 41.5% |
Film Build: | 1.0 - 1.4 mils per full wet coat |
Coverage: | 529 sq ft per gallon @ 1 dry mil |
Pot Life: | 1 - 2 hours |
V.O.C: | 4.2 lbs/gal |
Disposal/Safety: | See MSDS for this product |
Humidity Resistance: | Excellent |
Salt Spray Resistance: | Excellent |
Part #: ADV.57825
Price and Units
Units: 2.5L
Units: 2.5L Product Links: MSDS Technical Data Sheet |
Customers Who Looked At This Item Also Looked At:
EURO MAX HS CLEAR 4.2 VOC |
|
FAST EURO MAX ACTIVATOR 4.2VOC |
|
MEDIUM EURO MAX ACTIVATOR 4.2 |
|