CANDY APPLE RED AU
SERIES 700
Low VOC Urethane Paint
High Performance Urethane Single Stage - 2.8 VOC
PRODUCT DESCRIPTION:
ADVANTAGE #700 Series 2.8 VOC Acrylic Urethane Colors are high
solids, high gloss, low VOC coatings intended for use as a
protective maintenance coating for automotive and industrial
applications, surfaces exposed to humidity, chemicals and
corrosive elements.
| #700 SERIES CUSTOM COLOR/CATALYST: | |
| HIGH PERFORMANCE URETHANE SINGLE STAGE SERIES 2.8 VOC - GALLON | |
| Gloss Black | #700-01 |
| Hot Rod Black | #701-01 |
| Brilliant Black Pearl | #702-01 |
| Gloss White | #703-01 |
| Fleet White | #704-01 |
| Pure White | #705-01 |
| Oxford White | #707-01 |
| Charcoal Mist Metallic | #708-01 |
| Galaxy Silver | #709-01 |
| Viper Red | #710-01 |
| Swift Red | #711-01 |
| Candy Apple Red | #712-01 |
| International Harvester Red | #713-01 |
| Allis Chalmers Orange | #714-01 |
| New Cat Yellow | #715-01 |
| School Bus Yellow | #716-01 |
| John Deere Yellow | #717-01 |
| John Deere Green | #718-01 |
| Ford Blue | #719-01 |
| Urethane Catalysts (Quart): | |
| 2.8 VOC High Performance Urethane Paint Catalyst | #729-04 |
| Premium Low VOC Reducer | #730-04 |
DIRECT TO METAL ADHESION:
NOTE: Performance is better when using DTM
primer under #700 series paint.
POT LIFE:
Pot life will be about 3-5 hours at 77° F.
| MIXING DIRECTIONS (4:1): | |
| 2.8 VOC |
|
| 4 PARTS | #700 Series Single Stage |
| 1 PART | #729 Catalyst |
| 1 PART | #730 Reducer or quality grade Low VOC urethane reducer |
SURFACE PREPARATION:
1. Wash area thoroughly with soap and water to remove
contaminates that solvent based cleaners cannot remove
effectively.
2. Clean area with Wax and Grease Remover.
3. Use a tack cloth to remove any surface contaminates that may
have settled on the repaired areas prior to paint application.
4. Apply #700 series High Performance Urethane Single Stage
Color.
APPLICATION DIRECTIONS:
Adjust air pressure to 40-50 psi at gun for gravity, siphon feed
guns or HVLP use 6-10 psi at air cap. Apply 2-3 medium coats
(maximum 2 mils wet per coat) or until hiding is achieved. Allow
a 15-20 minute flash time between coats and before force drying.
| DRY TIMES AT 77°F: | |
| FLASH TIME | 15-20 MINUTES |
| TO DELIVER | 16-24 HOURS |
| FORCE DRYING AT 140°F: | |
| PURGE TIME | 15 MINUTES |
| BAKE TIME AT 140°F | 40 MINUTES |
RECOATING:
2.8 VOC #700 Urethane Single Stage Color may be recoated after
16-24 hours at 77° F. After 16-24 hours it must be lightly
sanded/scuffed before additional color or clearcoat may be
applied.
ACCELERATOR & FISHEYE ELIMINATOR:
Accelerator and/or Fisheye Eliminatory is not recommended for
use in this product.
CLEAN-UP:
Clean spray equipment immediately after use with Gun Wash, or a
high quality lacquer thinner, or compliant solvent depending on
area regulations.
| TECHNICAL DATA: | |
| Color: Various | |
| Catalyst: #729 | |
| Low VOC Reducer: #730 | |
| Mixing ratio (2.8 VOC): 4:1:1 | |
| Weight Solids (RTS): 52 - 70% | |
| Viscosity #2 Zahn (RTS): | 18 - 28 seconds #2 Zahn |
| Pot Life: 3-5 hours | |
| Film Build per coat: | 1.0-2.0 mils per full wet coat |
|
Coverage: 850 sq.ft. per gallon @ 1 dry mil |
|
| Disposal/Safety: | See MSDS for this product |
Part #: ADV.712
Price and Units
Units: GALLON
|
Units: GALLON Product Links: Sales Flyer Color Card MSDS Technical Data Sheet |
Customers Who Looked At This Item Also Looked At:
|
2.8 VOC ACRYLIC ACTIVATOR 700- |
|
HMS Warehousing Corporation
